NANO V3.0 Development Board – Clone Compatible Model
₹350.00₹370.00 (-5%)
- Model Name/Number Arduino NANO
- Memory 32 KB of Which 2 KB Used By Bootloader
- Processor ATmega328
- USB 2.0 Ports Mini USB
- No. Of Cores Single
- Digital I/O Pin 22
- Weight 7g
Frequently Bought Together
- This item: NANO V3.0 Development Board - Clone Compatible Model(₹350.00
₹370.00(-5%)) - UNO R3 SMD Atmega328P Board - Clone Compatible Model (without Cable)(₹450.00
₹480.00)
NANO V3.0 Development Board – Clone Compatible Model
This Arduino-compatible Nano V3.0 micro-controller is a small, complete, micro-controller board based on the ATmega328 MCU. It has more or less the same functionality as the Arduino Duemilanove, but in a smaller package. It lacks only a DC power jack, and uses the more compact Mini USB (Mini-B) connector instead of a standard USB connector.
It is compatible with Arduino programs and the Arduino IDE. This version of the Nano uses the CH340G USB interface controller.
It can be powered via the Mini-B USB connection, a 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Note: If you are getting the error while uploading the code in the Arduino Nano or not detecting the port need to upload the bootloader.
Note – To use this board you must have installed CH340G Drivers
If you face error while dumping code change bootloader to old bootloader from the tools menu
Additional information
| Weight | 0.10 kg |
|---|---|
| Dimensions | 5 × 2 × 2 cm |
Reviews
There are no reviews yet.