Best Seller Items
-
-
2512 Package 1W SMD Resistor 5% Tolerance – 10 Pieces Pack
Applications:-
- Consumer Electronics
- Industrial Applications
- Power Management
- Portable Devices
₹25.00 -
₹55.00
₹65.0015% offRobot Wheel 70mm Dia. x 40mm Width
₹55.00₹65.0015% off -
1000 KV A2212 13T BLDC Motor
KV: 1000
No load Current : 10 V : 0.5 A.
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: 27.5 x 30mm
Shaft Diameter: 934;3.17mm
Shaft diameter : 3.175mm.₹380.00₹460.0017% off1000 KV A2212 13T BLDC Motor
₹380.00₹460.0017% off
-
-
₹130.00
₹200.0035% off28BYJ-48 Stepper Motor with driver
₹130.00₹200.0035% off -
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹150.00 -
₹160.00
₹250.00ADXL345-Triple Axis Linear Accelerometer
₹160.00₹250.00 -
16×2 LCD DISPLAY
The 16×2 LCD display is a compact module for text and basic symbol output. Widely used in electronics, it offers clear communication.
₹199.00₹250.0016×2 LCD DISPLAY
₹199.00₹250.00 -
₹200.00
₹250.0020% offWemos D1 Mini – IOT ESP8266 Based Development Board
₹200.00₹250.0020% off -
R385 DC Diaphragm PUMP
- Model Number : R-385
- Rated Voltage : DC 9 V to 12V (1 amps)
- Load current: 0.7A (Max)
- Flow: 1.5 to 2 Ltr/min
- Max Lift: 3m
- Max Suction: 2m
- Max Water Temp: 70 °C
- Pump Size: 90mm * 40mm * 35mm approx
- Input/output tube diameter: outer 8.5mm, inner 6mm approx
- Max Current: Up to 2 Amps while starting up.
- Main Color: Silver Tone, White
- Material : Metal, Plastic
- Life: up to 2500 Hours
₹210.00R385 DC Diaphragm PUMP
₹210.00 -
-
₹250.00
₹480.0048% offUNO R3 SMD Atmega328P Board – Clone Compatible Model (without Cable)
₹250.00₹480.0048% off -
-
MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino
- Support CAN V2.0B technical standard, communication rate 1Mb / S.
- Module 5V DC power supply, SPI interface protocol control
- 0 to 8 bytes long data field.
- 8MHZ crystal oscillator
- 120Ω terminal resistance
- Use High-speed CAN transceiver TJA1050
- Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation
- The working current: typical 5mA, standby current 1 microamp. Except for the power indicator.
₹255.00₹270.00 -
Neo 6M GPS : The Accurate GPS
Neo 6M GPS is a small, low-power, sensitive receiver with a compact form factor and multiple interfaces, used for accurate location in devices.
₹280.00₹400.0030% offNeo 6M GPS : The Accurate GPS
₹280.00₹400.0030% off